

laser micro diameter measurement
Japan TAKANO detector, laser diameter is widely used in optical fiber, ceramic, electric wire, communication cable, power cable and enameled wire, aluminum pipe, steel, fiber, glass glass rods, such as plastic pipe, water pipe diameter measurement, online inspection and off-line, and can realize automatic feedback control and the online communication with computer.
Product features:
Using drift followed since the correction technology, measurement and precision is not affected by environmental light temperature, noise, measured values very stable;
Using laser protection circuit with high reliability and high stability constant speed scan motor, guarantee the high measurement precision, high stability and long service life.
Five real-time display, LED diameter with four upper and lower set display and the center location;
Analog output deviation under DC + 10 v output control voltage;
Transfinite alarm on the floor of the green LED flashing and relay output;
Small size, sampling speed, sensitivity, high precision, stable and reliable performance, no trouble back at home.
Laser scanning, non-contact measurement, the measured object without damage;
With PID ?
Technical parameters: LT - 3011 - m uniaxial) (LT - 3012 - m biaxial)
Measuring range: 0.2-35 mm
Accuracy: + / - 2 microns
Resolution: + / - 0.1 microns
Scanning speed: 700 times/SEC
Repeatability error: + / - 0.001 m
Instrument installation dimensions: 283 x 80 x 45 uniaxial (mm) biaxial 265 x 232 x 45 (mm)
Measuring position height from the ground: arbitrary
Instrument weight: 1 kg
Working voltage: AC90 ~ 240 v
Ambient temperature: 50 ℃ below
日本TAKANO激光外徑測量儀,廣泛應用于光纖、陶瓷、電子線材、通信電纜、電力電纜、漆包線、鋁塑管、鋼材、纖維、玻 璃棒、塑料管、水管等的外徑測量,在線檢測和離線檢測均可,并能實現自動反饋控制以及與電腦的聯機通訊。
高精度穩定檢測-可用于軍工級的品控測量
***創新技術,可測量透明物體,***小可檢測0.05mm
產品特點:
采用漂移跟隨自校正技術,測量值和精度不受環境溫度、雜光照度影響,測量值極穩定;
采用高可靠激光保護電路和高穩定度恒速掃描馬達,保證高測量精度,高穩定性和超長使用壽命;
5位LED外徑實時顯示,帶4位上下限設定顯示和中心位置顯示;
模擬輸出 偏差值的DC±10V以下輸出控制電壓;
超限報警上下限的綠色LED閃爍和繼電器輸出;
體積小,采樣速度快, 靈敏,精度高,性能穩定可靠,無后顧之憂;
激光掃描,非接觸式測量,對被測量物無損傷;
帶PID反饋控制系統;
帶RS232標準數據通訊接口,能與PC機或PLC進行通訊;
微電腦數字控制方便操作和使用簡單;
可配備繼電器偏差驅動報警功能;
可輕松調整實際值與顯示值的誤差;
可設定上限值/下限值報警功能。
技術參數:(LT-3011M 單軸) (LT-3012M 雙軸)
可以測量透明產品(其它牌子做不到)
測量范圍 :0.05-35mm (其它牌子只能檢測0.2mm以上 )
測量精度 :±2μm
分辨率 :±0.1μm
掃描速度 :700次/秒
重復性誤差 :±0.001m
儀器外型尺寸 :單軸283×80×45(mm) 雙軸265×232×45(mm)
測量位置離地高度 :任意
儀器重量 :1KG
工作電壓 :AC90~240V
環境溫度 :50℃以下